Hello Boki,
I would like to use a SpinEdit with Minimum = 0 and no maximum. Is it possible to configure this ?
Until now, I had customized the SpinEdit source code to be able to do it, but I just installed the latest version and I was wondering if it is now possible to configure the SpinEdit this way using only its properties.
Thank you !
NxSpinEdit Min Max
Started by bertrod, Dec 22 2010 07:10 PM
6 replies to this topic
#1
Posted 22 December 2010 - 07:10 PM
#2
Posted 23 December 2010 - 12:04 AM
Hello,
You may set MaxDouble to the Max?
Best regards
You may set MaxDouble to the Max?
Best regards
boki@bergsoft.net | LinkedIn Profile
--
BergSoft Home Page: www.bergsoft.net
Users Section: users.bergsoft.net
Articles and Tutorials: help.bergsoft.net (Developers Network)
--
BergSoft Facebook page
--
Send us applications made with our components and we will submit them on: www.bergsoft.net/apps.htm. Link to this page will be also set on home page too.
--
BergSoft Home Page: www.bergsoft.net
Users Section: users.bergsoft.net
Articles and Tutorials: help.bergsoft.net (Developers Network)
--
BergSoft Facebook page
--
Send us applications made with our components and we will submit them on: www.bergsoft.net/apps.htm. Link to this page will be also set on home page too.
#3
Posted 23 December 2010 - 10:09 AM
Hello,
MaxDouble ? I don't see this property for the TNxSpinEdit (NextGrid version 5.2.7).
MaxDouble ? I don't see this property for the TNxSpinEdit (NextGrid version 5.2.7).
#4
Posted 23 December 2010 - 08:48 PM
Hello Bertrod,
This is a global variable. You may simply use it within statement.
Best regards
This is a global variable. You may simply use it within statement.
CODE
NxSpinEdit1.Max := MaxDouble;
Best regards
boki@bergsoft.net | LinkedIn Profile
--
BergSoft Home Page: www.bergsoft.net
Users Section: users.bergsoft.net
Articles and Tutorials: help.bergsoft.net (Developers Network)
--
BergSoft Facebook page
--
Send us applications made with our components and we will submit them on: www.bergsoft.net/apps.htm. Link to this page will be also set on home page too.
--
BergSoft Home Page: www.bergsoft.net
Users Section: users.bergsoft.net
Articles and Tutorials: help.bergsoft.net (Developers Network)
--
BergSoft Facebook page
--
Send us applications made with our components and we will submit them on: www.bergsoft.net/apps.htm. Link to this page will be also set on home page too.
#5
Posted 24 December 2010 - 10:17 AM
QUOTE (Boki (Berg) @ Dec 23 2010, 08:48 PM) <{POST_SNAPBACK}>
Hello Bertrod,
This is a global variable. You may simply use it within statement.
Best regards
This is a global variable. You may simply use it within statement.
CODE
NxSpinEdit1.Max := MaxDouble;
Best regards
Ok I get it, thanks for the tip I'll try it
#6
Posted 15 January 2013 - 05:16 AM
hi, sorry for waiking old thread, but i can't find answer for setting min value. setting spinedit1.min := 0; does not stop at zero.
so i read the above solution for setting the Max and thought it would apply to Min as well:
NxSpinEdit1.Min := MinDouble;
but the spinedit values scroll past/below 0.0, example: 3, 2, 1, 0, -1, -2, -3, -4, .. etc.
i tried to add MinDouble:=0.0; but that gives "left side can't be assigned" error.
so i read the above solution for setting the Max and thought it would apply to Min as well:
NxSpinEdit1.Min := MinDouble;
but the spinedit values scroll past/below 0.0, example: 3, 2, 1, 0, -1, -2, -3, -4, .. etc.
i tried to add MinDouble:=0.0; but that gives "left side can't be assigned" error.
#7
Posted 15 January 2013 - 05:30 AM
solved
ok, by accident, i entered min:=-1, and figured out the answer...you have to first set the value for Max, higher than zero.
ok, by accident, i entered min:=-1, and figured out the answer...you have to first set the value for Max, higher than zero.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users