There's a color for it (InactiveSelectionColor), but it never gets used that I can tell. Is there a way to do this?
Thanks.
Posted 16 May 2017 - 08:22 PM
There's a color for it (InactiveSelectionColor), but it never gets used that I can tell. Is there a way to do this?
Thanks.
Posted 16 May 2017 - 08:31 PM
Posted 16 May 2017 - 08:43 PM
HideFocus maybe also is required to set to True?
Best regards
Hmm not seeing that.
Grid.HideFocus
There is soHideSelection under SlidesOptions, but I don't see the other.
Posted 16 May 2017 - 10:02 PM
Posted 16 May 2017 - 10:52 PM
My apology, yes in v5 is in AppearanceOptions -> aoHideFocus.
This hides the selection decoration altogether. I was envisioning something like the screenshot.
In this example, the bottom grid is focused.
Edit: Closest I can get is to show the row indicator, which sort of works, since it shows even if the grid isn't focused. I'd prefer that the row stay highlighted too but with the InactiveSelectionColor, if possible.
Posted 17 May 2017 - 04:49 PM
Posted 18 May 2017 - 12:32 AM
Hi,
Maybe aoHideSelection flag in same property?
I tried that and it didn't work either. I guess it's not going to work.
Posted 19 May 2017 - 08:20 AM
Posted 19 May 2017 - 09:16 PM
Hi,
If you can, you can send me dfm file and I can try to change properties and see what's missing?
https://1drv.ms/u/s!...gf_EwGDzFLOcNw9
Posted 19 May 2017 - 11:47 PM
Posted 21 May 2017 - 04:36 PM
Posted 22 May 2017 - 04:29 PM
Hi,
Unfortunately, I wasn't be able to understand dfm you sent to me, so I created small demo project (attached).
If your set-up is different, maybe you can slightly change my form.
I was able to run your example in DXE8, and it works there. I'll try an example in D7, which is where my primary project needs to be compiled, to see if it works there.
Thanks.
Posted 23 May 2017 - 05:49 PM
I was able to run your example in DXE8, and it works there. I'll try an example in D7, which is where my primary project needs to be compiled, to see if it works there.
Thanks.
Something about my project is causing the issue. In a stand-alone test project the highlighting is working. Thanks for your help.
Now, I just need to try and figure out what's blocking the highlighting from happening.
0 members, 1 guests, 0 anonymous users